You could be considering, “Aren’t journal file holder already simple to seek out and fairly low-cost?” It will get even simpler and cheaper, my pal. One sheet of plywood = EIGHTEEN information! At $3.50 per top-grade plywood file, I used to be completely on board.
I used to be impressed by Ana White’s plans for a similar, and I adopted her lower checklist on a 4’ x 4’ sheet of plywood (half of a full-size sheet). One full sheet makes 18 information!! I made 9 and even that felt beneficiant.
To make 9 wooden journal file holders, you’ll need:
- 1 half-sheet (4′ x 4′) of plywood, 1/4″ thick. (Use a full sheet for 18.) I sprang for hardwood ply, as a result of I’m price it.
- 1×4 size of timber, 8’ lengthy. Technical observe: my piece was really 19mm x 90mm x 2.4m, due to the metric system. The precise measurement is sort of the identical.
- PVA glue
- High quality painter’s tape
- Clamps (optionally available)
- Finishings of your selection: paint, varnish, decoupage paper, and so on
The way to make the Wooden Magazine File Holder: Step by Step Mission
Minimize the board into three 10″ extensive strips and three 4″ extensive strips, as proven. For those who ask properly on the ironmongery shop, they’ll lower the strips for you. You may noticed by means of the rest with whichever noticed you may have at house, even a hand noticed if mandatory.
I used a round noticed to make the lengthy cuts. (To information it on a straight line, I clamped a spare 1×4 to the plywood to behave as a information for the noticed.) The brief cuts have been achieved on a drop noticed, which was simple to set on a 30º angle.
- Utilizing the 4” strips, lower 9 items which are 6¼” lengthy.
- Utilizing the 4” strips, lower 9 items which are 12” lengthy.
- Utilizing the 1×4, lower 9 items which are 10” lengthy.
So that you’ve received all of your items lower. Nice! Time for meeting. These are the items you want for every file.
Glue the bottom piece to the underside edge of 1 aspect, centered. Then glue the opposite aspect piece to the bottom. Tip: use a spare 1×4 part to prop up the piece whereas gluing.
Use painter’s tape to carry collectively all of the items as you glue them collectively – sides, entrance after which again.
(In case you have clamps, in addition they do the job – however I discovered the tape to be gentler and simpler for positioning the timber.)
I left the glue to dry in a single day. The subsequent day, I added a contact of wooden putty in a number of the cracks for a flush end. A light-weight sand took care of any mess from the glue and putty.
My items of plywood have been beginning to appear to be journal information!
I went for a quite simple end on these information, in the same vein to my Scandi dresser makeover: I used danish oil on the edges and semi-gloss paint for the fronts and backs.
(As an additional precaution, I even put little felt ft on the bases.)
I gave them one other couple of days for the finishes to treatment, after which excitedly positioned them in my examine.
Associated: 46 Superior DIY Wooden Tasks For Absolute Inexperienced persons
Fairly good-looking, hey? I just like the extreme profile of my information, all straight traces and solid-coloured panels. I’ve a factor for Scandinavian-influenced minimalism!
There are such a lot of concepts for customizing them with your individual designs: polka dots, crosses, stencils, stripes, chalkboard paint, decoupaged paper with mod podge… it’s countless. You may as well discover label plates at a craft retailer and add these on, too. I hold my information mag-side out so I didn’t fear about it.
This bookshelf is trying tidier than ever. (There’s 5 right here, however the different 4 are about to hitch the crew very quickly.) Even IKEA couldn’t promote me wood journal information this cheaply — in the event you want a great deal of these, positively give it a shot making your individual!